This lesson is an introduction to sludge conditioning. Topics covered include a brief explanation of colloidal systems, theory of chemical and heat conditioning, and conditioning aids. The lesson includes an instructor's guide and student workbook. The instructor's guide contains a description of the lesson, estimated presentation time,…

This lesson deals with special considerations that should be made when choosing a sludge solids management program, briefly describing the source of solids in wastewater and why they must be dealt with. The various solids handling processes and ultimate disposal methods are also briefly described, followed by a detailed discussion of the technical…

This unit (which consists of a single lesson) summarizes and reviews most of the solids handling processes in common use in municipal treatment plants. The instructor's guide for the unit includes: (1) an overview of the lesson; (2) lesson plan; (3) lecture outline (keyed to a set of 72 slides); (4) student worksheet (with answers); and (5) two…

This student manual contains the textual material for a single-lesson unit which summarizes and reviews most of the solids handling processes in common use in municipal treatment plants. No attempt is made to detail the theory and operation of the processes. Topics discussed include: (1) sources of sludge; (2) the importance of sludge management;…

This unit provides an introduction to basic concepts which are applicable to all biological treatment systems. It consists of three lessons which focus on: the microorganisms found in biological systems; the factors that affect the growth and health of biological systems; and the interrelationship between groups of microorganisms, their…

This manual contains the textual material for a three-lesson unit which introduces students to the basic concepts applicable to all biological treatment systems. The general topic areas addressed in the lessons are: (1) the microorganisms found in biological systems; (2) the factors that affect the growth and health of biological systems; and (3)…

Laboratory tests used to determine status and to evaluate and/or maintain process control of the various sludge treatment processes are introduced in this lesson. Neither detailed test procedures nor explanations of how the tests should be applied to every unit are explained; this information is provided in other modules. The instructor's manual…

This module describes the process used to determine solids mass and location throughout a waste water treatment plant, explains how these values are used to determine the solids mass balance around single treatment units and the entire system, and presents calculations of solids in pounds and sludge units. The instructor's manual contains a…

The rise time test (along with the settleometer procedure) is used to monitor sludge behavior in the secondary clarifier of an activated sludge system. The test monitors the effect of the nitrification/denitrification process and aids the operator in determining optimum clarifier sludge detention time and, to some extent, optimum degree of…

A brief overview of the basic concepts and philosophies for sampling water and waste water systems is presented in this module. The module is not intended to specify sampling procedures, frequencies, or locations for specific treatment facilities but rather to outline those general procedures which should be followed when sampling under most…

Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1 laboratory training skills, this module provides waste water treatment plant operators with the basic skills and information needed to: (1) standardize a nephelometric turbidimeter; (2) determine the turbidity of a sample; and (3) calculate…