Publication Date
In 2024 | 0 |
Since 2023 | 1 |
Since 2020 (last 5 years) | 2 |
Since 2015 (last 10 years) | 7 |
Since 2005 (last 20 years) | 29 |
Descriptor
Source
Author
Publication Type
Education Level
Higher Education | 11 |
Postsecondary Education | 6 |
Elementary Secondary Education | 5 |
Two Year Colleges | 4 |
Secondary Education | 3 |
Adult Education | 2 |
Elementary Education | 2 |
High Schools | 2 |
Junior High Schools | 1 |
Middle Schools | 1 |
Audience
Practitioners | 132 |
Teachers | 93 |
Administrators | 32 |
Students | 19 |
Policymakers | 7 |
Support Staff | 5 |
Community | 4 |
Media Staff | 4 |
Counselors | 2 |
Location
Florida | 13 |
Mississippi | 12 |
Ohio | 12 |
Canada | 7 |
Missouri | 7 |
Georgia | 6 |
Illinois | 6 |
California | 4 |
Minnesota | 4 |
Texas | 4 |
Louisiana | 3 |
More ▼ |
Laws, Policies, & Programs
Carl D Perkins Vocational and… | 1 |
Elementary and Secondary… | 1 |
No Child Left Behind Act 2001 | 1 |
Assessments and Surveys
What Works Clearinghouse Rating
Environmental Protection Agency, Washington, DC. Office of Radiation and Indoor Air. – 1996
This fact sheet details important information on Indoor Air Quality (IAQ) in school buildings, problems associated with IAQ, and various prevention and problem-solving strategies. Most people spend 90 percent of their time indoors, therefore the Environmental Protection Agency ranks IAQ in the top four environmental risks to the public. The…
Descriptors: Air Flow, Child Health, Climate Control, Educational Facilities
OSTENBERG, JOE W. – 1961
THE STANFORD UNIVERSITY SCHOOL PLANNING LABORATORIES CONDUCTED AN EDUCATIONAL SURVEY OF THE EDUCATIONAL NEEDS OF THE MCPHERSON CITY SCHOOLS BY STUDYING THE EXISTING CONDITIONS, LOCAL ECONOMIES, AND POTENTIAL POPULATION GROWTH. IT WAS RECOMMENDED THAT A NEW SENIOR HIGH BE BUILT TO HOUSE 700-750 STUDENTS, THE ANTICIPATED ENROLLMENT 10 YEARS AFTER…
Descriptors: Air Conditioning Equipment, Building Design, Case Studies, Controlled Environment
Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education. – 1976
Intended for the vocational instructor, the booklet presents a task list and competency record for the occupational program of service center mechanic. The list was developed by a working committee of auto mechanics instructors and industry representatives throughout the state of Minnesota for use in program articulation between secondary and…
Descriptors: Academic Standards, Articulation (Education), Auto Mechanics, Behavioral Objectives
Casey, John M. – 1990
The University of Georgia (UG) conducted a complete campus building condition evaluation survey in 1989 that identified the nature and magnitude of the capital renewal/deferred maintenance requirements for each campus building. The survey design was based on a model developed by Harlan Bareither at the University of Illinois. Data were collected…
Descriptors: Capital, Capital Outlay (for Fixed Assets), College Buildings, Deferred Maintenance
Casey, John M. – 1990
A complete campus building condition evaluation survey was conducted at the University of Georgia in 1989 and results for the housing department were analyzed. The survey design was based on a model developed by Harlan Bareither at the University of Illinois that separates building deficiencies into seven general headings. Data were collected at…
Descriptors: Capital, Capital Outlay (for Fixed Assets), College Buildings, College Housing
Jacobs, Clinton O.; Mulcahy, John V. – 1983
In order to determine needs for teaching various competencies in agricultural mechanics courses, a study was conducted to determine the types and frequencies of service/repair operations performed by an Arizona agricultural machinery company from January 1 to June 30, 1981. Data were obtained from 1,232 service orders at the Arizona Machinery…
Descriptors: Agricultural Education, Agricultural Engineering, Agricultural Machinery, Agricultural Machinery Occupations
Vocational Curriculum Resource Center of Maine, Fairfield. – 1995
This curriculum guide is designed to assist instructors in the development and implementation of a comprehensive, competency-based automotive curriculum. It contains an instructional unit for each task listed on the enclosed job analysis or DACUM (Developing a Curriculum) chart. These units include introduction, performance objectives, suggested…
Descriptors: Auto Mechanics, Behavioral Objectives, Competency Based Education, Engines
Electric Energy Association, New York, NY. – 1974
Much of the innovative work in the design and application of heating, ventilating, and air conditioning (HVAC) systems is concentrated on improving the cost effectiveness of such systems through optimizing energy use. One approach to the problem is to reduce a building's HVAC energy demands by designing it for lower heat gains and losses in the…
Descriptors: Air Conditioning, Climate Control, Controlled Environment, Design Requirements
Leovic, Kelly W.; Craig, A. B. – 1994
Radon is a naturally occurring radioactive gas in ambient air that is estimated to cause thousands of deaths from lung cancer each year. This report outlines ways in which to ameliorate the presence of radon in schools buildings. The first section is a general introduction for those who need background information on the indoor radon problem and…
Descriptors: Buildings, Educational Facilities Design, Educational Facilities Improvement, Elementary Secondary Education
Tannehill, Dana, Ed. – 1990
This test item bank on auto body repair contains criterion-referenced test questions based upon competencies found in the Missouri Auto Body Competency Profile. Some test items are keyed for multiple competencies. The tests cover the following 26 competency areas in the auto body curriculum: auto body careers; measuring and mixing; tools and…
Descriptors: Auto Body Repairers, Behavioral Objectives, Competency Based Education, Criterion Referenced Tests
Ontario Ministry of Skills Development, Toronto. – 1991
These training standards for motor vehicle mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related training program. They are designed…
Descriptors: Apprenticeships, Auto Mechanics, Behavioral Objectives, Certification
Davis, Ronald; Yancey, Bruce – 1982
Designed to be used as a supplement to a two-book course in basic drafting, these instructional materials consisting of 14 units cover the process of drawing all working drawings necessary for residential buildings. The following topics are covered in the individual units: introduction to architectural drafting, lettering and tools, site…
Descriptors: Air Conditioning, Architectural Drafting, Behavioral Objectives, Building Design
Wheeler, Arthur E. – 1995
To help maintain good indoor air quality (IAQ) in schools, guidance for the development and implementation of an effective program for maintenance and operation of heating, ventilating, and air-conditioning (HVAC) systems are discussed. Frequently, a building's occupants will complain about IAQ when the temperature or humidity are at uncomfortable…
Descriptors: Air Conditioning, Air Conditioning Equipment, Air Flow, Climate Control
Hall, Richard; Ellis, Richard; Hardin, Tim – 1995
This manual, written in response to requirements of the Washington State legislature, focuses on practices which can be undertaken during the siting, design, construction, or renovation of a school, recommends practices to help ensure good indoor air quality during building occupancy, and suggests protocols and useful reference documents for…
Descriptors: Climate Control, Educational Facilities Planning, Elementary Secondary Education, Guidelines
Naval Training Command, Pensacola, FL. – 1973
This Rate Training Manual provides the technical knowledge and skill requirements necessary to prepare Utilitiesmen to perform tasks involved in the installation, maintenance, and repair of plumbing, heating, steam, fuel storage and distribution systems, water treatment and distribution systems, air conditioning and refrigeration equipment, and…
Descriptors: Air Conditioning, Equipment Maintenance, Fuels, Heating